Hi,
We have released the MicroEJ Multi-Sandbox firmware [1] on developer.microej.com.
First for the OM13092 an evaluation board for the LPC54608 MCU [2]. This BLUE [3] firmware allow to develop application and interact with evaluation board through an Android smartphone. You can flash the board by reading the first section our getting started [4].
Also using a BLUE [3] MicroEJ firmware is the MCIMX6UL-EVKB board in addition to the screen LCD8000-43T board [5]. To flash this firmware follow the getting started at microej.nxp.com [6].
Last but not least, a RED [3] firmware is available for the FRDM-K28F [7] in addition to the screen TFT PROTO 5" Capacitive [8], this mainly-UI firmware can be flashed by following the getting started at microej.nxp.com [9].
The MicroEJ Team
[1] https://developer.microej.com/index.php?resource=FIRM_NXP
[2] https://www.nxp.com/support/developer-resources/hardware-development-tools/lpcxpresso-boards/lpcxpresso-development-board-for-lpc5460x-mcus:OM13092
[3] https://developer.microej.com/runtime-env-firmware.html
[4] https://developer.microej.com/xively-nxp-getting-started-iot.php
[5] https://www.nxp.com/products/processors-and-microcontrollers/applications-processors/i.mx-applications-processors/i.mx-6-processors/i.mx6ultralite-evaluation-kit:MCIMX6UL-EVK
[6] https://microej.nxp.com/device-references/5911df681ec26b41009459b1
[7] https://www.nxp.com/support/developer-resources/hardware-development-tools/freedom-development-boards/mcu-boards/nxp-freedom-development-board-for-kinetis-k27-and-k28-mcus:FRDM-K28F
[8] https://www.mikroe.com/tft-proto-5-capacitive-board
[9] https://microej.nxp.com/getting-started/k28
